JumpSport Fitness Trampoline:

How to Replace Arched Leg on JumpSport Fitness Trampoline

Tools Required: 1 6mm Allen wrench

2. Locate the internal bolt: Find the hole in the bottom rubber leg plug that leads to the internal mounting bolt. Do not remove the outer rubber leg plug unless you are replacing the entire foot cap or plug hardware

3. Remove the old leg: Insert a 6mm Allen wrench (or the wrench provided with your trampoline) into the leg plug hole to engage the bolt head inside. Turn counterclockwise to unscrew and remove the damaged leg from the frame.

4. Align the new leg: Position the socket of the new replacement leg over the mounting stud (lug) on the trampoline frame. Make sure the notch in the leg socket lines up with the small pin or key on the frame stud

5. Secure the bolt: Insert the Allen wrench back through the leg plug hole and tighten the internal bolt clockwise. Turn the wrench sideways for extra leverage to cinch it down completely until there is no wobble.

6. Flip it back over: Once the replacement leg is completely tight and secure, turn your fitness trampoline right-side up